Timepoint Parameter Entry (Apparatus 1/2/5/6) - Agilent Technologies 850-DS Operator's Manual

4 Operating the 850-DS

Timepoint Parameter Entry (Apparatus 1/2/5/6)

This screen specifies the time and the parameters to use for each sample
collection.
Figure 19.
Option
Timepoint #
Timepoint
Spindle Speed
Next Media Volume
Media Change
Auto Calculate
850-DS Operator's Manual
Timepoint Properties Screen (Apparatus 1/2/5/6)
Function
An indicator of the currently selected timepoint.
The amount of time to wait after the method starts before the sample will be
collected.
The spindle speed to use just after this sample collection finishes.
The nominal volume present in the vessels after each sample cycle. This volume
is used to determine the proper sample manifold position if used with an Agilent
708-DS. The Auto Calculate option can be enabled to automatically determine
this value.
Indicates that you will be performing either a full media change or a media
addition after this timepoint.
Enable this option to have the firmware automatically determine the Next Media
Volume based on the method parameters. If enabled, the Next Media Volume
field will become inaccessible.
47