Chapter 3
Connector and LED Information
RTSI Connector Pinout
M Series User Manual
(USB-62xx Mass Termination Devices)
Mass Termination, complete the following steps.
1.
Power down and unplug the device.
2.
Loosen the four Phillips screws that attach the lid to the enclosure, and
remove the lid.
3.
Replace the fuse while referring to Figure 3-4 for the fuse location.
Fuse
Figure 3-4. USB-62xx Mass Termination Fuse Location
4.
Replace the lid and screws.
Refer to the
RTSI Connector Pinout
and Clock
Generation, for information about the RTSI connector.
To remove the fuse from the USB-62xx
section of Chapter 9,
3-12
Digital Routing
ni.com