Side Panels; Rs-232 Connector; Figure 1-4. Location Of The Connectors And The Dc Power Jack - National Instruments GPIB-232CV-A User Manual

Chapter 1 Introduction

Side Panels

GPIB-232CV-A User Manual
The GPIB connector and the RS-232 connector are mounted on opposite
side panels. On the DC version, the DC power jack is on the same end as
the serial connector.
Figure 1-4 shows the location of the RS-232 and GPIB connectors and the
DC power jack.
DC Power Jack
(DC version only)
GPIB-232CV-A
RS-232

RS-232 Connector

Figure 1-4. Location of the Connectors and the DC Power Jack

IEEE 488 Controller
1-6
GPIB Connector
www.ni.com