Getting Started
Installing NI-DAQmx
Installing Other Software
Installing the Hardware
Device Pinouts
© National Instruments Corporation
M Series devices feature up to 80 analog input (AI) channels, up to four
analog output (AO) channels, up to 48 lines of digital input/output (DIO),
and two counters. If you have not already installed your device, refer to the
DAQ Getting Started Guide. For specifications arranged by M Series
device family, refer to the specifications document for your device on
.
ni.com/manuals
Before installing your DAQ device, you must install the software you plan
to use with the device.
The DAQ Getting Started Guide, which you can download at
, offers NI-DAQmx users step-by-step instructions for
ni.com/manuals
installing software and hardware, configuring channels and tasks, and
getting started developing an application.
If you are using other software, refer to the installation instructions that
accompany your software.
The DAQ Getting Started Guide contains non-software-specific
information about how to install PCI, PCI Express, PXI, PXI Express, and
USB devices, as well as accessories and cables.
Refer to Appendix A,
pinouts.
Device-Specific
Information, for M Series device
1-1
1
M Series User Manual