Counter Timing Signals - National Instruments NI 6221 User Manual

Counter Timing Signals

© National Instruments Corporation
GATE
OUT
D1
Figure 7-27. Pulse Generation for ETS
For information about connecting counter signals, refer to the
Counter/Timer Pinouts
M Series devices feature the following counter timing signals.
• Counter n Source
• Counter n Gate
• Counter n Aux
• Counter n A
• Counter n B
• Counter n Z
• Counter n Up_Down
• Counter n HW Arm
• Counter n Internal Output
• Counter n TC
• Frequency Output
In this section, n refers to either Counter 0 or 1. For example, Counter n
Source refers to two signals—Counter 0 Source (the source input to
Counter 0) and Counter 1 Source (the source input to Counter 1).
D2 = D1 + ΔD
section.
7-25
Chapter 7 Counters
D3 = D1 + 2ΔD
Default
M Series User Manual