What You Need To Get Started; Optional Equipment - National Instruments GPIB-232CV-A User Manual

Chapter 1 Introduction

What You Need to Get Started

Caution To meet FCC emission limits for this device, you must use a Type X2
double-shielded GPIB cable. If you operate this equipment with a non-shielded cable,
it may interfere with radio and television reception.

Optional Equipment

GPIB-232CV-A User Manual
Before you install your GPIB hardware, make sure you have all of the
following items:
One of the following boxes, which is included in your kit:
– GPIB-232CV-A (100-120 VAC)
– GPIB-232CV-A (220-240 VAC)
– GPIB-232CV-A (DC)
If you have the GPIB-232CV-A AC version, one of the following
power cords:
– U.S. standard power cord
– Swiss power cord
– Australian power cord
– Universal European power cord
– North American power cord
– U.K. power cord
If you have the GPIB-232CV-A DC version, one of the following:
– 9 V wall-mount power supply (100–120 VAC)
– 9 V wall-mount power supply (220–240 VAC)
Type XI or X2 single-shielded or double-shielded GPIB cable (1, 2, or
4 m), which you can purchase from National Instruments
You can order a 9-pin, 2 m RS-232 shielded cable (GPIB-232CV-A to
IBM PC) from National Instruments.
1-2 www.ni.com