Login; Logout - Motorola MVX1000 User Manual

Login

Once the boot-up process is complete, the Login Screen is displayed.
When starting the MVX1000 for the first time, the system can only be accessed by a supervisor. Since
no rights have been defined, no other user can enter. So initially after first login, a supervisor has to
connect to the Local Area Network (LAN) of the back office for updating the MVX1000 system with a list
of users with login rights.
To login to the MVX1000 system:
Step 1. Under User ID field, enter your User ID (or type
act as a Guest user, tap the Skip Login Button on the Login Screen.
Login Screen
Figure 4-2
Tapping Skip Login may disable recording, uploading and other operations based on agency
NOTE
configuration.
Step 2. Under the Password tab, enter your password (or type admin for default configuration) and tap
.
Next
Step 3. Under the Partner ID tab, enter the ID of your partner and tap
MVX1000 pops up a
To avoid repeated login and logout operations, the MVX 1000 retains the last logged-in user in
IMPORTANT
its memory when power is turned off. Keeping the last user logged-in enables the user to turn
the vehicle power on and off without repeatedly logging-in.

Logout

To logout from the MVX1000 system:
Step 1. Tap the Logout Button on the application screen. The MVX1000 pops up a dialog box to confirm the
operation.
Step 2. Tap to confirm logout.
dialog that welcomes you to the system.
Hello
MVX1000 LCD Control Head
for default configuration) and tap Next. To
admin
or tap
Next
4 - 3
to skip.
The
No Partner