Wireless Data Upload Summary - Motorola MVX1000 User Manual

5 - 2 MVX1000 In-Car Digital Video System User Guide
• At Home via LAN
• Upload Capable Network Found
• Upload progress bar is displayed
The UPLOAD LED illuminates at the front panel of the MVX1000 Unit.
If for any reason, data transmission stops during upload, the system identifies the situation and
NOTE
attempts to re-establish connection providing alert indications.
When upload is completed, Upload successfully completed is displayed on the screen and the
6.
UPLOAD LED turns off.
Do not remove the cable from the vehicle yet-new software update download may follow (see
7.
Software Update on page
Disconnect the LAN cable from the LAN Wire Access Point once configuration and software updates
8.
(if applicable) have downloaded to the MVX1000.

Wireless data upload summary

In this method, data upload is performed by wireless connection at the drop zone of the back office.
To upload data by WLAN:
To initiate Upload, move your vehicle within the wireless coverage area of the station.
1.
Log-in to the MVX1000:
2.
• Enter the User ID and tap Next.
• Enter Password and tap Next.
Logging-in requires permissions. Pressing "Skip login" when password is required may disable
NOTE
recording and important other DVR operations.
• Enter your Partner ID and tap Next or tap No Partner to skip.
Upload starts automatically (may require user confirmation to begin) within a few seconds to allow
3.
your vehicle to reach a parking spot before upload begins.
The following indications are displayed on the screen:
• WLAN connected
• At Home via LAN
• Upload Capable Network Found
• Upload progress bar is displayed
The wireless connection status is indicated by the following icons:
• Signal strength level is very good
• Signal strength level is good
• Signal strength level is low
5-6).