Table of Contents
Advertisement
1 - 8
MVX1000 In-Car Digital Video System User Guide
MVX1000 Rear Connectors
Table 1-2
Connector
GPS
Interface connector to a GPS antenna.
DISPLAY
Interface connection to MVX1000 LCD Control Head.
NOTE
RADAR /
RS232 connection to interface the MVX1000 to a Stalker Dual or Kustom Golden Eagle
COM1
radar system.
AUX
The Auxiliary Cable supports the following Input/ Output (I/O) connections:
PC
Data connector to interface the MVX1000 to a mobile laptop or Motorola MW810 Mobile
Workstation.
LAN
The LAN connection enables videos and metadata to upload, and program updates to be
downloaded to the MVX1000.
When the MVX1000 is connected to a LAN system, the LED indicators on the connector
show the following:
• Link Indicator - steady Green when the system has an available connection to LAN.
• Active Indicator - blinks Green when the system is accessing the LAN.
Link Indicator
VIDEO IN
Video input connector for camera connections via a quad camera splitter cable (up to three
Front/Rear Camera inputs and one Passenger Camera input) or Dual Camera Splitter
Cable (one Front/Rear camera and one Passenger Camera).
AUDIO IN
Audio input connector for microphone connections via the Audio Splitter Cable (two wired
microphones and up to two wireless microphones).
WLAN
Three Wireless Local Area Network (WLAN) antenna connectors.
PWR IN
Power input to the MVX1000 Unit.
MVX1000 units that shipped prior to release R1.1 require a software upgrade to R1.1
or later to enable the operation of the MVX1000 LCD Control Head, the MVX1000
software must be upgraded to release R1.1.
• Four (4) programmable General Purpose I/O's (factory default are inputs)
• Four (4) General Purpose Inputs
• One ignition sense input
• One input from the UPS indicating that the MVX1000 is now operating from the
UPS backup battery
RJ-45 Connector
Active Indicator
Description
Advertisement
Table of Contents
