Advertisement
Advertisement
Table of Contents
Related Manuals for Motorola VIP1910
Summary of Contents for Motorola VIP1910
- Page 1 InstallatIon Manual VIP1910/VIP1920...
-
Page 2: Declaration Of Conformity
Caring for the Environment by Recycling When you see this symbol on a Motorola product, do not dispose of the product with residential or commercial waste. Recycling your Motorola Equipment Please do not dispose of this product with your residential or commercial waste. Some countries or regions, such as the European Union, have set up systems to collect and recycle electrical and electronic waste items. Contact your local authorities for information about practices established for your re- gion. If collection systems are not available, call Motorola Customer Service for assistance. Declaration of Conformity Motorola, Inc. Teknikringen 20 583 30 Linköping, Sweden declare under our sole responsibility that the Motorola VIP1910 and Motorola VIP1920 to which this declaration relates are in conformity with one or more of the following standards: EMC Standards EN55022 EN55024 EN50083-2 CISPR-22 CISPR-24 Safety Standards EN60065 EN60825 EN60950 IEC 60950 + A1: 1992 + A2: 1993 + A3: 1995 + A4: 1996 following the provisions of the Directive(s) of the Council of the European Union: EMC Directive 89/336/EEC Low Voltage Directive 73/23/EEC WEEE Directive 2002/96/EC... - Page 3 CAUTION RISK OF ELECTRIC SHOCK CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. WARNING TO REDUCE THE RISK OF FIRE OR ELECTRICAL SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. Important Safety Instructions • Read these instructions. • Keep these instructions. • Heed all warnings. • Follow all instructions. • Do not use this apparatus near water. • Clean only with dry cloth. • Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
- Page 4 CAUTION TO PREVENT ELECTRICAL SHOCK, DO NOT USE THIS PLUG WITH AN EXTENSION CORD, RECEPTACLE, OR OTHER OUTLET UNLESS THE BLADES CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE. The lightning flash with arrowhead within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product. Repairs If you find the unit in need of repair, contact your system operator for repair or replacement. © 2006 Motorola, Inc. All rights reserved. No part of this publication may be reproduced in any form or by any means or used to make any derivative work (such as translation, transforma- tion, or adaptation) without written permission from Motorola, Inc. MOTOROLA and the Stylized M logo are registered in the US Patent and Trademark Office. All other product or service names are the property of their respective owners. Motorola reserves the right to revise this publication and to make changes in content from time to time without obligation on the part of Motorola to provide notification of such revision or change. Motorola provides this guide without warranty of any kind, implied or expressed, including, but not limited to, the implied warranties of merchantability and fitness for a particu- lar purpose. Motorola may make improvements or changes in the product(s) described in this manual at any time.
-
Page 5: Preparing The Remote Control For Use
Your VIP1910/VIP190 PaCkage enclosed material The following material should be present in your package. IP set-top box Remote control Ethernet SCART with 2 AAA batteries cable cable Ins tallation G uide VIP1100 AC adaptor Installation guide PreParIng the reMote Control for use In order to prepare your remote control for use, insert the batteries. Carefully place the terminals (+ and -) of the batteries as indicated on the back of the battery compartment. - Page 6 PlaCeMent For best reception of the IR-signals from the remote control to the set-top box, make sure to place the set-top box close to the edge of the shelf. Do not place anything on top of the set-top box, instead leave a free space of 20 cm above it for proper ventilation and cooling. 20 cm When using the remote control, point it to the IR-receiver in the center of the front panel. Make sure that there is no obstacle between the remote control and the set-top box, such as for example a table.
-
Page 7: Front Panel
VIP1910/VIP190 oVerVIew front panel Ir receiver Display and Receives signals navigation buttons from remote con- Only available on trol and keyboard. some models smartcard slot On the side panel Green light - the set-top box is operational. Red flash - the set-top box receives a signal from the remote control or a keyboard. - Page 8 InstallIng the VIP1910/VIP190 Connecting to broadband Connect one end of the Ethernet cable to the connector marked ETHERNET on the rear panel of the set-top box and the other end to a hub or the Ethernet wall connector provided by your broadband operator. Connecting to the TV set Connect one end of the enclosed SCART cable to the SCART connector marked TV on the set-top box and the other end to your TV set. Both analog audio and standard definition video are sent to the TV set through this con- nection. Optional: Connecting to a VCR or digital video recorder You can record the program you are currently watching by connecting an auxiliary device, such as a VCR or a digital video recorder, to the VIP1910/ VIP1920, provided that the program is copy-approved content. Connect the set-top box to the auxiliary device using the SCART connector marked “VCR” . To record, change to the TV channel on the set-top box you wish to record and start recording on the device. To watch recorded video, first put the set-top box in stand-by mode, and then press play on the auxiliary device.
- Page 9 Optional: DVD recorder Broadband wall outlet or hub S/PDIF ETHERNET RF - IN HDMI POWER RF - OUT +5.7V DC TOSLINK...
- Page 10 oPtIonal: ConneCtIng hIgh DefInItIon VIDeo If your TV set is HDTV compatible, you can connect the set-top box to the TV set using the HDMI or the component connectors instead of the SCART connector to receive and display HDTV, i.e. skip installation step and replace it with installation step or Using the HDMI connector If your TV set has a HDMI connector, you can connect it to the HDMI connector on the set-top box with a HDMI cable (not included) to receive digital high definition video and digital audio. Using the component connectors (YPbPr) If your TV set has a component video connectors (YPbPr), you can connect it to the component connectors on the set-top box with three RCA cables (not included) to receive analog high definition video. Make sure to match the connectors so that Y on the set-top box is connected to Y on the TV set, Pb to Pb and Pr to Pr. Note! The component connectors only send video signals. To receive audio you also need to use one of the possible audio connections, i.e. step S/PDIF ETHERNET RF - IN HDMI POWER RF - OUT +5.7V DC TOSLINK...
- Page 11 oPtIonal: ConneCtIng to external auDIo If you want to use an external source to play audio such as a stereo or home cinema equipment or if you are using the component connectors to connect the set-top box to the TV set, there are three possible methods of connecting to audio. Analog stereo: Using the Audio L/R connectors Connect a dual RCA cable (not included) to the Audio L/R connectors on the set-top box and connect the other ends to your stereo or TV set. Make sure to match the connectors so that L on the set-top box (white) is con- nected to L on the TV set or stereo and R is connected to R. Digital audio: Using the SPDIF connector Connect a RCA cable (not included) to the SPDIF connector on the set-top box and connect the other end to your stereo or TV set. Digital audio: Using the optical Toslink connector Connect a Toslink cable (not included) to the Toslink connector on the set- top box and connect the other end to your stereo or TV set. Stereo/ S/PDIF 1 S/PDIF 2 HiFi system S/PDIF...
-
Page 12: Connecting To Power
DIgItal terrestrIal tV (VIP190 MoDel onlY) Connecting to Digital Terrestrial TV Connect one end of a RF cable (not included) to the RF-IN connector, and the other end to the antenna outlet in your home. You will now be able to receive TV channels broadcasted over the digital terrestrial network. For information on how you proceed with the channel search and scanning, please see separate instructions from your operator. Digital TV outlet/Antenna S/PDIF ETHERNET RF - IN HDMI POWER RF - OUT +5.7V DC TOSLINK ConneCtIng to Power Connecting to power When all other cables are connected, connect the power cord to the power connector on the set-top box and to mains power. S/PDIF ETHERNET RF - IN... - Page 13 optional: Inserting a smartcard If you have received a smartcard to enable access to the TV signals, insert it in the smartcard slot on the side of the set-top box. The chip on the smartcard should be directed downwards and towards the set-top box. The card is fully inserted when only 5 mm of the card remains on the outside. Displaying picture To display the signal from the set-top An example of box on the TV set, switch to an external what the input input. (On some TV sets this is done symbol may look automatically.) There is often a button on like. the TV remote control for this purpose. Otherwise, see your TV User’s Guide for instructions. naVIgatIng usIng the reMote Control The navigation buttons (four arrow buttons and a OK button) are used to move around on Service portal pages and in menus, and to select the highlighted alternative. The navigation buttons are also used to navigate web pages, as the arrows move the indicator between the different links. Use the OK button to select links to be opened.
-
Page 14: Selecting Video Format
settIng uP tV forMat Immediately as the set-top box is starting, press and hold the MENU but- ton to enter the TV setup menu. A screen similar to the one below should now appear. While you view the set-top box configuration window, the LED on the front panel will toggle between red and green light each second. The LED will also flicker red and green for every button pressed on the remote control. selecting tV format Start by selecting the the TV color system format that is used. Press OK button enter the TV system settings, and choose between PAL and NTSC with the up( ) and down( ) buttons. PAL is the standard primarily used in Europe, whereas NTSC is primarily used in North America. Press OK when your are standing on your chosen format to select it and go back one step in the menu. selecting video format Select video output format depending on the capabilities of your TV set and what video connectors you are using. - Page 15 Standard Definition TV set If your TV set is a standard definition TV set (not HDTV capable), press arrow down( button to mark “SD Output” and press OK. If you are using the SCART cable, select with arrow up( and down( ) buttons which video format you prefer. Note: if you are using the SCART cable, you will always be able to see TV and video in standard resolution, no matter what video format you have chosen. If you are using the component connectors on the set-top box with a stan- dad definition TV set, select the third alternative - Component set to “ON” Press OK when your are standing on your chosen format to select it and go back one step in the menu. High Definition TV set If your TV set is HDTV enabled and it is connected to set-top box using the HDMI or component video connectors on the set-top box, please refer to your TV set specification to learn what resolution it supports. If you can’t find the resolution, we recommend that you use the setting of 720p HD output. Press OK on your selected choice. saving the settings/exiting settings Press BACK to go back to the left main menu to exit the set- tings window and press down ) and OK to select Exit ...
-
Page 16: Troubleshooting
When the set-top box is connected to the TV set, Ethernet and power, you will see an image similar to the one to the right on the TV screen. The set-top box is now connecting to the network and downloading the software needed. Please wait until the loading is finished. The dots in the middle of the screen will change color during the start up of the system. From the start, all dots are dark grey. As the set-top box searches for software or is processing downloaded software, one dot at a time starts blinkning yellow. When software is being downloaded, a progress bar of ten smaller dots appear and the main dot blinks green. When one of the five steps in the start up process is completed, the dot for it turns green. When all five main dots are green, the system is ready to run. If the software in any of the steps could not be loaded, the dot turns red and the remaining steps are cancelled. trouble shootIng If you encounter any problems during start up, please note which of the main dots (1 - 5) that has not turned green before you contact your support personnel. on-lIne helP When your set-top box is up and running, please see the instructions provided by your IPTV provider on how to reach the services and how to access the User’s Guide. Motorola, Inc. Teknikringen 20 583 30 Linköping, Sweden http://www.motorola.com |6117310232R1BE~ 06/06...