Vitoair Draught Stabiliser - Viessmann Vitotronic 200 KW2 Installation And Service Instructions Manual

Vitoair draught stabiliser,

A To the burner
B To the control unit
Function check
Press the motor rotary selector and
turn to the central position.
H Enable burner from control unit →
The rotary selector should move
towards 3.
In emergency mode
part no. 7338 725 and 7339 703
Colour coding to DIN IEC 60 757
BK
GN/YE
H Burner OFF →
The rotary selector should move
towards 5.
Press the rotary selector on the
motor and turn clockwise to the limit
stop beyond position 3.
Components
black
green/yellow
77