Flue System Accessories; Draught Stabiliser (Draught Limiter For Installation In The Chimney); Draught Stabiliser (Draught Limiter For Installation In The Connection Piece); Design Information - Viessmann VITOLIGNO 200-S Technical Manual

Installation accessories

5.2 Flue system accessories

Draught stabiliser (draught limiter for installation in the chimney)

Part no. 7249 379

Draught stabiliser (draught limiter for installation in the connection piece)

Part no. 7264 701

Design information

6.1 Positioning

Minimum clearances

420 b
(380)
A Required clearance for cleaning, heat-up and recharging
Rated heating output
Dim. a
Dim. b
VITOLIGNO 200-S
(cont.)
(480) (480)
520 520
kW
mm
mm
It is necessary to install the draught stabiliser to safeguard the speci-
fied draught characteristics within the flue system.
As an alternative to the draught stabiliser for installation in the chimney,
this draught stabiliser can be used to safeguard the specified draught
conditions.
420
b
(380)
20/30
1020
640
VIESMANN
6
40/50
1020
640
69