DataCard CR805 Installation And Administrator's Manual page 40

b.
Route the film around the rollers on the
cartridge. A diagram on the cartridge
shows the correct routing pattern.
c.
Slide the empty silver take-up spool onto
the cartridge until it clicks into place.
d.
Turn the take-up spool counterclockwise
just enough to take up any slack in the film.
4.
Replace the retransfer film cartridge in the
printer.
5.
Close the printer access door.
6.
Continue with
24
"Load Cards" on page 25.
b
Printer Installation
c
d