DataCard CR805 Installation And Administrator's Manual page 109

ExceptionCardDebowDistanceDown—Set the amount (distance) to move the debow arms

down. The value is in increments of the debow motor. (This value is used when
ExceptionCardDebowDirection is set to Down.)
Increase the value to bend the card down more.

Decrease the value to bend the card down less.

ExceptionCardDebowDistanceUp—Set the amount (distance) to move the debow arms up.

The value is in increments of the debow motor. (This value is used when
ExceptionCardDebowDirection is set to Up.)
Increase the value to bend the card up more.

Decrease the value to bend the card up less.

ExceptionCardDebowDwellMs—Set the time, in milliseconds, the debow action is applied to

a card. The default is 2000 ms (2 seconds).
Increase the value to apply the debow action longer.

Decrease the value to apply the debow action for less time.

Exception Card Impresser Settings:
ExceptionCardImpressDepth—Set the depth of the impression on a card. The value is in

steps of the impresser punch.
Increase the value to deepen the impression.

Decrease the value to lessen the impression.

You may need to adjust the card impress depth value based on the card material
and overlay type used.
ExceptionCardImpressDwellTime—Set the time, in milliseconds, that the impresser remains

in contact with the card. The default is 2000 ms (2 seconds).
Increase the value to allow the impresser to remain on the card longer.

Decrease the value to impress the card for a shorter time.

ExceptionCardImpressPositionOffset1—Set the distance from the trailing edge of the card to

the center of the first impression on the card.
Increase the offset value to increase the distance of the impression from the trailing edge

of the card.
Decrease the offset value to decrease the distance of the impression from the trailing

edge of the card.
CR805 Retransfer Card Printer Installation and Administrator's Guide 93