Notice For Europe - DataCard CR805 Installation And Administrator's Manual

Notice for Europe

The EU Declaration of Conformity can be found on EntrustDatacard.com under product
compliance.
WARNING: This is a class A product. This equipment is compliant with class A of either CISPR32 or
CISPR22. In a domestic/residential environment this equipment may cause radio interference, in
which case the user may be required to take adequate measures.
WEEE: The model RX10 retransfer printer uses a lithium coin cell battery. Refer to the service
manual for battery removal instructions.
Simplified EU Declaration of Conformity
Entrust Datacard Corporation declares that the following radio equipment: MXD, MX6000,
MX6100, PB6500, MX2000, MX2100, SP55k, SP35, SP55, CP40, CP60, CP80, SP75, FP65, SR200,
SR300, PX10, PX30, EX30, MPR3800, CR500f, MX1100, RX10, and PB1000 is in compliance with
the Directive 2014/53/EU.
Intentional Radiator Information
Description/Model Number
PX10 Supplies RFID
PX30 Supplies RFID
Central Issuance Supplies
RFID
LX30, RX10 Supplies RFID
EX30 Supplies RFID
FP65 Supplies RFID
Central Issuance Smartcard
Coupler
EMC Compliance Notice:
For model RX10/Multi-hopper configurations, to ensure compliance with Conducted Immunity
standard EN61000-4-6, use USB cables no longer than three meters in length.
FCC ID Frequency
GDI-Q20010 13.56MHz
GDI-Q30030 13.56MHz
GDI-SID004 13.56MHz
GDI-506241001 13.56MHz
GDI-Q30130 13.56MHz
GDI-Q10055 13.56MHz
GDI-50543001 13.56MHz
v
Effective Radiated
Power (ERP) mW
9.16E-06
9.16E-06
1.96E-07
3.03E-05
9.16E-06
3.65E-05
1.45E-05