Debower
The heat from the retransfer process can cause the card to become bowed slightly. The debower
returns the card to its proper shape. The Debower settings define values for the debow action
performed after the image has been transferred to the card. Debower settings are available for
WebService access-level users only. Contact your service provider for assistance if you need to
change the printer's debower settings.
Cards are debowed after each retransfer operation.
SmartCard
The SmartCard settings define values for the smart card module in the printer. SmartCard
settings are available to WebService access-level users only.
MagStripeGeneral
Magnetic stripe settings are available for WebAdmin and WebService access-level users to set up
basic magnetic stripe options.
Description
1) Attempts
2) Coercivity
3) DataFormat1
4) DataFormat2
5) DataFormat3
6) NoDataDisableTrack
7) ReadTrack1
8) ReadTrack2
9) ReadTrack3
10) SSA1
11) SSA2
12) SSA3
13) StripeEncoderMultiplier
86
Default
Current
Value
Value (unit)
3
3
HICO
HICO
IATA
IATA
ABA
ABA
TTS
TTS
Disabled
Disabled
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
0
0
0
0
0
0
1.0
1
Allowed
Range
[1 – 5]
[-4 – 4]
[-4 – 4]
[-4 – 4]
[0.9 – 1.1]
Printer Manager