Laminator - DataCard CR805 Installation And Administrator's Manual

Using custom magnetic stripe data formats is a two-step process. First, define the custom tracks
using MagStripeCustomTrack1, MagStripeCustomTrack2, and MagStripeCustomTrack3. Second,
apply the custom track using the settings on the MagStripeGeneral menu.
1.
To use the defined custom track:
a.
Open the MagStripeGeneral menu.
b.
Select Custom for DataFormat1, DataFormat2, or DataFormat3 to use the custom track.
MagStripeCustomTrack1 corresponds to DataFormat1

MagStripeCustomTrack2 corresponds to DataFormat2

MagStripeCustomTrack3 corresponds to DataFormat3

2.
Click Set Current to apply the changes.

Laminator

The Laminator settings let you specify values when using a laminating system.
The Laminator setting displays in the Printer Setting menu only when a laminator is
attached to the printer.
Description
1) DebowDelay
2) ExceptionCardDebow
Direction
3) ExceptionCardDebow
DistanceDown
4) ExceptionCardDebow
DistanceUp
5) ExceptionCardDebow
DwellMs
6) ExceptionCardImpress
Depth
7) ExceptionCardImpress
DwellTime
8) ExceptionCardImpress
PositionOffset1
90
Current Value
Default Value (unit)
1000 1000
Down Down
15 15
105 105
1000 1000
0 0
2000 2000
2000 2000
Allowed Range
[0 – 1500]
[0 – 150]
[0 – 150]
[0 – 5000]
[-250 – 250]
[0 – 10000]
[0 – 4000]
Printer Manager