Table of Contents
Advertisement
Installing a parallel interface
Parallel interface
Figure 68: Removing the slot cover
Ê Push the PCI board holder backward.
Ê Remove the slot cover.
Figure 69: Routing the cable
Ê Insert the slot cover with the parallel interface.
Ê Connect the cable to the system board (see arrow).
Ê Route the cable as shown in the picture directly upon the system board.
Ê Close the server, connect it to the power outlet, and switch it on as described
in the
chapter „Completion" on page
107.
88
Options Guide
RX300 S2
Advertisement
Table of Contents
