Fujitsu PRIMERGY RX300 S2 Options Manual page 11

Introduction Options and upgrade
RemoteView
RemoteView provides you with a comprehensive test and diagnostics package.
The test and diagnostics software is stored on a chipDISK. The chipDISK is a
memory component with an IDE interface. In the event of a fault the test and
diagnostics software is automatically loaded from the chipDISK and executed.
RemoteView Service Board S2 LP (2U/3U)
The RemoteView Service Board S2 LP (RSB S2 LP) is a PCI board with a
completely independent system, i.e. it has its own operating system with Web
server and SNMP agents and can optionally be equipped with an external
power supply. The RSB permits remote diagnosis for system analysis, remote
system configuration and remote restart even in the event of operating system
failure or hardware faults. It has its own LAN connection. All the functions of the
RSB are available via a LAN.
External SCSI interface
One channel of the on-board SCSI controller can optionally be made available
externally.
Parallel interface for printers
As an option, a parallel interface can be provided for printers.
Conversion of SCSI 1-channel version to SCSI 2-channel version
The internal SCSI configuration can be converted from a 1-channel version to a
2-channel version. The hard disk access times are shortened. Use of the
2-channel version together with a RAID controller increases the availability of
the system.
Options Guide 11
RX300 S2