Removing 2Nd Scsi Backplane - Fujitsu PRIMERGY RX300 S2 Options Manual

Converting from 1- to 2-channel version
13.1

Removing 2nd SCSI backplane

Ê Open the server as described in the
Ê Remove all hot-plug hard disks or/and the hot-plug tape drive on the left side
(for a description see the Operating Manual).
Figure 78: Disconnecting the cables
Ê Pull out the connectors of the I
SCSI cables (3) from the SCSI backplane.
RX300 S2
Removing 2nd SCSI backplane
chapter „Preparation" on page
1
2
2
C cable (1), the power cable (2), and both
Options Guide
21.
3
3
95