Fujitsu PRIMERGY RX300 S2 Options Manual page 69

PCI slots Installing the PCI controller in the riser card
Figure 46: Installing controller
Ê Insert the controller into the PCI slot and push it down carefully.
Ê Fix the slot cover/s with the screw/s.
Ê If necessary connect the cables to the controller or other components.
Ê Insert the riser card and be careful with the cables.
Ê Close the server, connect it to the power outlet, and switch it on as described
in the chapter „Completion" on page 107.
Options Guide 69
RX300 S2