Preparation; Removing The Server Form The Rack - Fujitsu PRIMERGY RX300 S2 Options Manual

4

Preparation

V
CAUTION!
Observe the safety instructions in the
4.1

Removing the server form the rack

Ê Terminate all applications and shut down the server correctly.
Ê If your operating system has not switched off the sever, press the on/off
switch.
Ê Pull all power connectors out of the power outlets.
Figure 2: Loosening the knurled screws
Ê Loosen the four knurled screws (1) and pull the server as far as possible out
of the rack (2).
RX300 S2
chapter „Safety notes" on page
1
Options Guide
2
1
15.
21