Replacement Routines; Preparation; Pulling Out / Removing The Server - Fujitsu PRIMERGY RX200 S4 Service Supplement Manual

4

Replacement routines

V
CAUTION!
When handling systems and boards, make sure you observe the safety
notes in the
4.1

Preparation

Ê Exit all applications and shut down the server correctly.
Ê If your operating system has not switched off the server, press the On/Off
button.
Ê Unplug the power plugs.
4.1.1

Pulling out / removing the server

Figure 2: Removing the server
Ê Undo the knurled screws (1) and pull the server carefully out of the rack (2)
as far as it will go.
RX200 S4
chapter "Safety notes" on page
Service Supplement
11ff.
2
CSS
T T
COM PAC COM PAC
1
1
17