Siemens SIMATIC ET 200SP User Manual page 128

Technical data
10.7 Module data
Operator controls
Mode selector
Supply voltage
Type of supply voltage
Low limit of permitted range (DC)
High limit of permitted range (DC)
Reverse polarity protection
Power and voltage failure backup
Power/voltage failure backup time
Input current
Current consumption (rated value)
Current consumption (in no-load operation), typ.
Inrush current, max.
Power
Power consumption, max.
Incoming power to the backplane bus
Power loss
Power loss, typ.
Memory
Type of memory
CFast memory card
Work memory
Integrated
Hardware configuration
integrated power supply
Number of DP masters
Via CM
Racks
Modules per rack, max.
Number of rows, max.
Time-of-day
Clock
Type
Buffering time
Deviation per day, max.
Interfaces
Number of Industrial Ethernet interfaces
Number of PROFINET interfaces
Number of PROFIBUS interfaces
Number of interfaces RS 485
Number of USB interfaces
128
6ES7677-2AA40-0AA0
1
24 V DC
19.2 V
28.8 V
Yes
5 ms
1.5 A; full processor load, incl. ET 200SP modules and USB
use
0.6 A
4.7 A; rated value
36 W; incl. ET 200SP modules and USB use
8.75 W
15 W; without ET 200SP modules and without USB use
DDR3-SDRAM
No
4 GB
Yes
1
64; CPU + 64 Module + server module (mounting width
max. 1 m)
1
Hardware clock
6 wk; at 40 °C ambient temperature, typ.
10 s; typ.: 2 s
2
1
1; via CM DP module
1; via CM DP module
3; 3x USB 2.0 front, 500 mA each – of which 2 x 500 mA
and 1 x 100 mA simultaneously
CPU 1515SP PC (F)
Manual, 05/2017, A5E32701806-AC