Commissioning; Notes On Commissioning - Siemens SIMATIC ET 200SP User Manual

Commissioning

7.1

Notes on commissioning

Improper commissioning in hazardous areas
Device failure or risk of explosion in hazardous areas.
• Do not commission the device unless it is fully mounted and connected according to the
• Before commissioning, please consider the effects on other devices in the plant.
Hot surfaces
Risk of burns due to hot surfaces.
During operation, only touch the device with appropriate protective gloves.
NOTICE
Condensation in the device
Damage to the device due to condensation if the temperature between transport or storage
and the installation site differs by more than 20 °C (36 °F).
Before commissioning the device, leave it to stand for several hours in the new
environment.
NOTICE
Data loss
Data loss may occur if write filters are used incorrectly.
Therefore, note the information on write filters.
Two write filters are available for configuration under Windows Embedded:
• Enhanced Write Filter (Page 78)
• File Based Write Filter (Page 82)
CPU 1515SP PC (F)
Manual, 05/2017, A5E32701806-AC
WARNING
specifications in the section Enhanced Write Filter (EWF) (Page 78).
CAUTION
7
49