[ 2-1 ] "Write default EEPROM data"
Reset the setting value of the EEPROM to the factory default value.
< Inspection method >
(1) Click the "Write default EEPROM data" button and start writing the default value.
(Refer to Fig. 7.)
(2) If the process is correctly completed, the message that writing is successful and the
EEPROM version appear in the "Results" column.
The inspection result of
"OK" or "NG" is displayed.
If default value writing is successful,
the EEPROM version is displayed.
Fig. 7 "Write default EEPROM data" screen
7