Brother QL-1060N Service Manual page 77

(3) Put the retaining ring onto the right end of the shaft of the platen ASSY.
(4) Put the platen shaft bearing into the shaft on the left hand side and secure it with the
retaining ring.
Platen shaft bearing
Retaining ring
Fig. 3.2-36 Reassembling the Top Cover ASSY (3)
(5) Secure the side panels L and R onto the top cover with the four screws.
Hook
Side panel L
Screws
Fig. 3.2-37 Reassembling the Top Cover ASSY (4)
Top Cover
Platen ASSY
Positioning pins
Positioning pins
III- 49
Platen gear
Platen shaft bearing
Top cover
Retaining ring
Hook
Side panel R
Screws