Brother QL-1060N Service Manual page 74

(8) Assemble the main PCB, ground spring plate and FG harness ASSY with the four screws.
(9) Connect the nine connectors and flat cable with the main PCB as shown in the figure.
Important: When replacing the main PCB, implement each operation described in
Main PCB
Tape sensor PCB ASSY
FG harness ASSY
Cutter home
position sensor
Put the harness
into the hook.
Put the harness
into the hook.
SB PCB ASSY
"APPENDIX 1. MAINTENANCE SOFTWARE OPERATION".
Screw
FG harness ASSY
Under cover
Tape feed motor ASSY
Power supply PCB
Put the harness
into the hook.
Put the harness
into the hook.
Put the harness
into the hook.
Fig. 3.2-32 Installing the Power Supply PCB and Main PCB (6)
Screw
Ground spring plate
Head ASSY
Head ASSY
Put the harness
into the hook.
III- 46
Screw
Main PCB
Screw
Put the harness
into the hook.
Fan motor
DC8V power
PCB ASSY
Cutter motor ASSY
Cover open sensor
Put the harness
into the hook.