(3) Turn the upper cover ASSY upside down.
(4) Secure the harness of the tape sensor PCB ASSY with the filament tape.
Tape sensor PCB
ASSY harness
Filament tape
Fig. 3.2-25 Installing the Upper Cover ASSY (3)
(5) Tighten the upper cover ASSY with the two screws and the three screws.
Note 1: The screws (A) are screw, bind B M2.6x4. Other screws are taptite, bind B
M2.6x8.
Note 2: When assembling the upper cover ASSY, be sure not to catch the head cable and
flat cable.
Fig. 3.2-26 Installing the Upper Cover ASSY (4)
Screws (A)
III- 42
Upper cover ASSY
Screws
Upper cover ASSY
Tape sensor flat cable
Under cover