Brother QL-1060N Service Manual page 105

(2) Click the "Fan ON" button in the dialog box shown to turn the fan. (Refer to Fig. 14.)
(3) Confirm the fan turning and click the "Fan OFF" button.
(4) If the fan is stopped normally, "OK" appears in the central message column. (Refer to
Fig. 15.)
If the fan does not work normally, "Fan Error." appears in the message column.
Click to turn the fan.
Fig. 14 "Fan check" screen before the fan is turned
Fig. 15 "Fan check" screen after the fan is turned
(5) If the fan works normally, click the "OK" button. If not, click the "NG" button. Then,
finish the inspection.
Click to stop the fan.
(It is enabled only during
fan turning.)
The inspection result is displayed.
"Fan Error" appears if the fan does
not work normally.
13