Brother QL-1060N Service Manual page 36

(2) Remove the two retaining rings from the platen ASSY.
(3) Remove platen shaft bearing (A) from the platen ASSY.
(4) Remove the left end of the platen ASSY from the top cover.
(5) Remove the platen ASSY from the platen gear and platen shaft bearing (B).
Top cover
Platen shaft bearing (A)
Retaining ring
1
Platen ASSY
Retaining ring
Platen ASSY
2
3
Top cover
Platen ASSY
3
Platen gear
Platen shaft bearing (B)
Fig. 3.1-6 Disassembling the Top Cover ASSY (2)
III- 8