Brother QL-1060N Service Manual page 59

(8) Put the section "B" of the head ASSY into the hole "A" on the chassis L sub ASSY and
assemble the chassis L sub ASSY onto the sub plate with the two screws.
Screws
Hole "A"
"B"
Head ASSY
Chassis L sub ASSY
Sub plate
Note: When assembling the chassis L sub ASSY, make sure that there is no gap on the
bottom of each chassis sub ASSY.
Gap
Gap
Fig. 3.2-7 Reassembling the Mecha ASSY (7)
III- 31