(5) Insert the VR spacer into the tape sensor PCB ASSY while aligning the spacer with the
wall of the tape sensor PCB ASSY as shown in Fig. 27.
Note: Insert the VR spacer until it hits the head ASSY slightly. If inserting the spacer
more, the head ASSY may be damaged.
(6) Check that the value which has been written down in Step (4) is not changed. (Refer to
Fig. 28.)
Note: If the value is changed substantially, the tape sensor PCB ASSY may be defect.
Fig. 27
Fig. 28 "VR adjustment tool" screen
25
VR spacer
Wall of tape sensor PCB ASSY
Tape sensor PCB ASSY