Installing An Optical Drive In An Lff Chassis - HP ProLiant DL20 Gen10 User Manual

Installing an optical drive in an LFF chassis

Installing an optical drive in an LFF chassis
Prerequisites Prerequisites
Before you perform this procedure, make sure that you have the following tools available:
T-10 Torx screwdriver
Phillips No. 1 screwdriver
Procedure Procedure
1. If installed, remove the front bezel .
2. Power down the server.
3. Remove all power:
a. Disconnect each power cord from the power source.
b. Disconnect each power cord from the server.
4. Disconnect all peripheral cables from the server.
5. Remove the server from the rack .
6. Remove the access panel .
7. Remove the optical drive blank.
8. Install the optical drive bracket.
Installing an optical drive in an LFF chassis 90