Remove The Air Baffle - HP ProLiant ML30 Gen10 Plus Maintenance And Service Manual

If the server is in rack mode, remove the server from the rack .
5. Remove the access panel:
a. Loosen the access panel thumbscrew (callout 1).
b. Slide the access panel toward the rear panel, and then lift it away from the chassis (callout 2).

Remove the air baffle

Remove the air baffle
CAUTION: For proper cooling, do not operate the server without the access panel, baffles, expansion slot covers, or CAUTION:
blanks installed.
Procedure Procedure
1. Power down the server.
HPE ProLiant ML30 Gen10 Plus Server Maintenance and Service Guide 36