Rear Roller Replacement - Vision Fitness T60 Service Manual

7.2 REAR ROLLER REPLACEMENT

1) Remove both rear roller end caps using a Phillips screwdriver (Figures A & B).
FIGURE A
2) Remove both roller adjustment screws using an 8mm Allen Wrench (Figure C).
3) Remove the rear roller from the running belt (Figure D).
FIGURE C
4) Reverse Steps 1-3 to install a new rear roller.
5) Center and tension the running belt as outlined in Section 3.2.
CHAPTER 7: PART REPLACEMENT GUIDE
FIGURE B
FIGURE D
29