CHAPTER 7: PART REPLACEMENT GUIDE
7.11 CONSOLE REPLACEMENT
1) Turn off power and remove the power cord from the unit.
2) Remove the 4 screws holding the console faceplate to the frame (Figure A).
3) Pull up on the console faceplate (FIgure B).
FIGURE A
FIGURE B
4) Disconnect the console cable, emergency stop wire, and heart rate wiring from the defective console and remove it (Figure C).
FIGURE C
5) Reverse Steps 1-4 to install a new console.
6) Test the treadmill for function as outlined in Section 7.15.
38