Side Rail Replacement - Vision Fitness T60 Service Manual

7.3 SIDE RAIL REPLACEMENT

1) Remove the motor cover as outlined in Section 7.1.
2) Remove the rear roller end cap using a Phillips screwdriver (Figures A & B).
3) Remove the rear roller end cap bracket using a 3mm Allen Wrench (Figure C).
4) Slide the side rail off the back of the treadmill (Figure D).
5) Reverse Steps 1-4 to install a new side rail.
30
CHAPTER 7: PART REPLACEMENT GUIDE
FIGURE A
FIGURE C
FIGURE B
FIGURE D