Troubleshooting - Error Messages On The Console - Vision Fitness T60 Service Manual

6.5 ERROR MESSAGES ON THE CONSOLE
Class Error
Level Code
B 0140
C 01A0
C 01A4
C 01A5
C 01A6
C 01A8
C 01AB
C 01AD
C 02A0
C 02A1
C 02A2
C 02A8
C 02AD
C 02B5
C 02B6
C 02B7
C 02B8
C 02B9
C 02BA
C 02BC
C 02BD
C 04A0
18
CHAPTER 6: TROUBLESHOOTING
Description Conditioned
Incline motor operation fail. When the elevation is supposed to move,
it does not. When the error happens, the
elevation will be locked. The command
initialize is needed to unlock.
Incline motor disconnection. When the elevation position cable is not
connected.
Main motor U phase Main motor U phase wire disconnected.
disconnection.
Main motor V phase Main motor V phase wire disconnected.
disconnection.
Main motor W phase Main motor W phase wire disconnected.
disconnection.
Main motor over current. Main motor over current (7 Amps)
Inverter error. Internal error of the inverter.
Inner electron over When it thinks the user is over 130 KG
temperature: motor over (350 lbs) making the motor overload.
loading.
Main motor fail. The belt does not move when it is
supposed to move.
Over AC power input voltage. Power input voltage over range.
Over / low DC bus voltage. Power input voltage over range.
Inverter circuit of motor driver Motor resistance is closed.
failed.
MCB over temperature. MCB over temperature.
Inverter senses the normal Inverter senses the normal rated
rated current is over 150% for current is over 10.5 Amps for at least 60
60 seconds. seconds.
Speed up is over current. Software error.
Speed down is over current. Software error.
Running status over current. Software error.
The inner memory IC data MCB failure.
write error.
The inner memory IC data MCB failure.
read error.
Ground connection of fuse MCB failure.
error.
Inverter hardware interrupt MCB failure.
error.
No communication response. Digital Communication failed.
Solution
1. Check connection of the elevation motor.
2. MCB LED check.
3. Replace the incline motor.
1. Check connection of the elevation motor.
2. MCB LED check.
3. Replace the incline motor.
1. Check the connection of the motor.
2. Replace the motor.
3. Replace the MCB.
1. Check the connection of the motor.
2. Replace the motor.
3. Replace the MCB.
1. Check the connection of the motor.
2. Replace the motor.
3. Replace the MCB.
1. Check the connection of the motor.
2. Check the condition of the deck / belt.
3. Do an amp check.
1. Check the MCB errors.
2. Replace the MCB.
Check the condition of the deck / belt, replace
as needed.
1. Check the power input connections.
2. Do a resistance check on the motor,
replace if needed.
3. MCB replacement.
Check the power input connections.
Check the power input connections.
Do a resistance check on the motor, replace if
needed.
1. Check the MCB temperature.
2. Check the cooling fan for function.
3. Replace the MCB.
Check the connection of the motor.
Check the condition of the deck / belt, replace
as needed.
Replace the MCB.
1. Check the connection of the motor.
2. Check the condition of the deck / belt,
replace as needed.
Replace the MCB.
Replace the MCB.
Replace the MCB.
Replace the MCB.
1. Check the console cable connection at the
MCB and UCB.
2. Check the MCB LEDs.
3. Replace the console cable, MCB, or UCB.