Troubleshooting - Error 02A1 / 02A2; Troubleshooting - Error 02Ad - Vision Fitness T60 Service Manual

6.11 TROUBLESHOOTING - ERROR 02A1 / 02A2

POSSIBLE CAUSES:
1) 02A1 - Over AC power input voltage.
2) 02A2 - Over / low DC bus voltage.
SOLUTION:
1) Check the incoming power to the treadmill.
2) Replace the MCB.

6.12 TROUBLESHOOTING - ERROR 02AD

POSSIBLE CAUSES:
1) 02AD - Motor over temperature.
SOLUTION:
1) Check the connection of the motor cable at the MCB (Figure A).
2) Remove the motor cable from the MCB. Use a multi-meter to check resistance across pins 5 & 6 on the motor cable. There should not be
an Ohm reading (should read 0).
a. If there is a resistance reading, replace the wire that connects pins 5 & 6 on the motor cable.
b. If there is not a resistance reading, replace the MCB.
FIGURE A
CHAPTER 6: TROUBLESHOOTING
ERROR 02A1 / 02A2
ERROR 02AD
FIGURE B
23