Table of Contents
Advertisement
EXCELL PRECISION CO., LTD.
Chapter 2 General Operation Description
2-1 Backlight Function
Press
key to select the display backlight mode:
.
.
.
2-2 Weighing Mode
2-2-1 Units Selection
1.
After indicator is turned on, use
viss, as the screen indicated.
2.
The selected unit will be memorized when you turn the indicator off. And the
memorized unit will appear after you turn on the indicator next time.
2-2-2 Check Weighing Mode
1. Preset " High limit", "Low limit" and " Beeper value" operation
Use
and
For example:
Preset "Low limit" ( Low limit >10d )
Press
Press
Press
Press
Preset "High limit" ( High limit ≥ Low limit )
Press
Press
Press
Press
Press
Press
02018058
⇒ "Auto Backlight" mode. When the weight is over 10d or any key is
pressed, the display backlight will be switched on. When the
weight returns to zero (the weight on platform is less than 10d),
the display backlight will switch off after 10 seconds.
⇒ Display backlight is on all the time.
⇒ Display backlight is off.
key to preset values.
key
the display shows
key 1 time
the display shows
key 2 times
the display shows
key 4 times
the display shows
key 1 time
the display shows
key 1 time
the display shows
key 2 times
the display shows
key 1 time
the display shows
key 5 times
the display shows
key 3 times
the display shows
8
key to select a unit from kg, lb, tael or
⇒ For 12key model
e.g. Low limit = 20 kg
e.g. High limit = 25 kg
.
.
.
.
.
.
.
.
.
.
ZSME300000317
Advertisement
Table of Contents
