3.4
Calibrating the Pressure Transmitter
Procedure
This section mainly describes the procedure for when Measure is set to mA Loop and Source is set to
pressure (P).
Selecting the Calibration Procedure
1.
In the calibration display, press Select Proc. (F2).
The calibration procedure setting display appears.
2.
Use the
The calibration procedure is selected, and the calibration display returns.
IM CA700-01EN
、 、▲、 or ▼ key to select a calibration procedure,and press ENTER.
The calibration procedure
information switches to the
selected one.
1
2
3
4
5
6
7
Index
3-11