Chapter 2 Source And Measure; Measuring Pressure - YOKOGAWA CA700-01 User Manual

Chapter 2 Source and Measure
2.1

Measuring Pressure

Procedure
To prevent injury to the user and damage to devices caused by incorrect connection or
pressure leakage, be sure to connect tubing correctly to the CA700 pressure input port by
following the instructions in the Getting Started Guide, IM CA700-02EN.
Selecting the Item under Measurement
1. From the top menu, use the ▲ or ▼ key to select Measure and Source, and press ENTER.
The source/measure screen appears.
2.
Press Setting (F5).
Display1 Setting and Display2 Setting appear on the function menu.
3.
Press Display1 Setting (F1).
The pressure measurement setting screen appears.
Note
To confirm the settings, be sure to press Setting Done (F5).
4. Use the ▲ or ▼ key to select Function, and press ENTER.
The measurement function options are displayed.
IM CA700-01EN
WARNING
Display1
Display2
Function menu
1
2
3
4
5
6
7
Index
2-1