Chapter 4 Saving And Deleting Data; Setting How To Save Measured Data - YOKOGAWA CA700-01 User Manual

Chapter 4 Saving and Deleting Data
4.1

Setting How to Save Measured Data

This section describes the procedure for setting how to save the pressure, DC current, and DC voltage
data that was measured in sections 2.1 and 2.4.
Procedure
1. From the top menu, use the ▲ or ▼ key to select Device Setting, and press ENTER.
2. On the Device Setting screen, use the ▲ or ▼ key to select Data Save Setting, and press
ENTER.
Setting the Save Method
3. Press the ▲ or ▼ key to select Logging Method.
Save and Logging appear on the function menu.
4.
Press Save (F1) or Logging (F2).
If you select Save, the setting is complete. Proceed to step 9.
IM CA700-01EN
Set the save method.
Set the data save interval (valid for Logging).
Set the number of data values to save
(valid for Logging).
Confirms the settings
1
2
3
4
5
6
7
Index
4-1