Connecting The Ca700 To Your Pc As A Usb Storage Device - YOKOGAWA CA700-01 User Manual

5.6 Connecting the CA700 to Your PC as a USB
Storage Device
Setting USB Parameters
In the USB settings of section 5.2, set USB Connection to Function and USB Function to Mass
Storage, and then restart the CA700. If you did not change the USB connection setting, you do not
have to restart the CA700.
Connecting to Your PC
• When you access the CA700 internal memory from your PC, do not perform any other
operation than reading. If you delete data from the internal memory or write data to it, the
CA700 may malfunction.
• Do not remove the USB cable or turn off the CA700 while the PC is accessing the CA700
internal memory. If you do, the CA700 may malfunction.
Connect the CA700 to your PC using a USB cable. Connect the cable to the CA700 mini-B USB port (see
section 5.2).
The CA700 will be identified as a removable hard drive.
Note
From a PC, you can access only the CA700 internal memory. You cannot access the USB memory device
that is connected to the CA700.
IM CA700-01EN
Set to Function.
Set to Mass Storage.
Confirms the settings
CAUTION
1
2
3
4
5
6
7
Index
5-19