6.5
Reference Value and Relative Display
Procedure
1.
When measured values are displayed on the screen, press RELATIVE on the CA700 front
panel.
REL appears on the screen, and a relative value based on the reference value is displayed.
If the reference value is assigned to the measured value, when you press RELATIVE, the measured value
will become the reference value.
Displaying the difference relative
to the reference value
2.
To return to the normal measurement display, press RELATIVE again.
Explanation
You can display relative values based on a reference value by setting the reference value to a specific
value or to the measured value when you press the RELATIVE key.
For details on the reference setting method, see section 2.1.
The following features are disabled while relative values are displayed.
• Measurement range change
• Min/Max Display
• Zero calibration
6-8
Difference relative
to the reference value
IM CA700-01EN