Optional Serial Communications Port For N/Na; (S )-Type Cpu Units - Omron CP1E-E14SDR-A User Manual

3-1-4

Optional Serial Communications Port for N/NA

The Serial Communication Port can be used for a CP1E N/NA
N/NA -type CPU Units
Built-in
RS-232C port
Optional Serial Communication Board
Model numbers
CP1W-CIF01
CP1W-CIF11
CP1W-CIF12
CP1W-CIF41
How to mount an Option Board
When mounting an Option Board, first remove the slot cover.
Grasp both of the cover's up/down lock levers at the same time to unlock the cover, and then pull the
cover out.
Then to mount the Option Board, check the alignment and firmly press it in until it snaps into place.
Precautions for Correct Use Precautions for Correct Use
Always turn OFF the power supply to the PLC before mounting or removing an Option Board.
CP1E CPU Unit Hardware User's Manual(W479)
CP1E N30/40/60
or NA20 CPU Unit
CP1W-CIF01 CP1W-CIF11/12
RS-232C Option RS-422A/485 Option
Board Board
Port
One RS-232C port
One RS-422A/485 port (not isolated) 50m
One RS-422A/485 port (isolated)
One Ethernet port
3 Part Names and Functions

(S )-type CPU Units

(S )-type CPU Unit.
10BASE-T
100BASE-TX
CP1W-CIF41
Ethernet Option
Board version 2.0
Maximum
transmission Connection method
distance
15m Connector (D-sub, 9 pin female)
Terminal block (using ferrules)
500m Terminal block (using ferrules)
100m Connector (RJ45, 8 pin modular)
3
3-19