Omron CP1E-E14SDR-A User Manual page 125

5 Installation and Wiring
End Plate
Use the PFP-M End Plates to secure the Units so that they do not move towards one end or the
other of the DIN Track.
Surface Installation
Surface Installation
• Create the mounting holes in the mounting surface as shown in the dimensions diagrams.
• Align the CP1E CPU Unit with the mounting holes and secure it in place with M4 screws.
Surface Installation Mounting Hole Pitch
• CP1E E30/40/60(S), N30/40/60(S ) or NA20 CPU Units or Expansion I/O Units with 32 or 40 I/O
Points
CP1E E30/40/60(S),
N30/40/60(S ) or NA20
CPU Unit
100mm
Expansion I/O Unit with
32 or 40 I/O Points
• CP1E E10/14/20(S) or N14/20 CPU Units, Expansion I/O Units with 8, 16, or 20 I/O Points, and
Expansion Units
CP1E E10/14/20(S)
or NA14/20 CPU Unit
Expansion I/O Unit
100mm
with 8, 16, or 20 I/O
Points
Expansion Unit
5-10
A
8mm
A
8mm
Unit
CP1E CPU Units E/N30(S ) CPU Unit
E/N40(S ) CPU Unit
E/N60(S ) CPU Unit
NA20 CPU Unit
Expansion I/O Units Unit with 32 I/O
points
Unit with 40 I/O
points
Unit
CP1E CPU Units E10 CPU Unit
E/N14(S) CPU Unit
E/N20(S) CPU Unit
Expansion I/O Units Unit with 8 input
points
Unit with 8 output
points
Unit with 16 output
points
Unit with 20 I/O
points
Analog I/O Units Analog I/O
Analog input
Analog output
Temperature Sensor Units
CP1E CPU Unit Hardware User's Manual(W479)
Mounting hole
pitch A (mm)
120±0.5
140±0.5
185±0.5
120±0.5
140±0.2
140±0.2
Mounting hole
pitch A (mm)
56±0.5
76±0.5
76±0.5
56±0.2
56±0.2
76±0.2
76±0.2
76±0.2
76±0.2