Omron CP1E-E14SDR-A User Manual page 99

3 Part Names and Functions
Output Specifications for Transistor Outputs (Sinking or Sourcing)
Item
CP1W-40EDT
Maximum 4.5 to 30 VDC
switching
0.3 A/output
1
capacity*
0.9 A/common
3.6 A/Unit
Leakage 0.1 mA max.
current
Residual 1.5 V max.
voltage
ON response 0.1 ms max.
time
OFF response 1 ms max.
time
At 24 VDC +10%/
-5%, 5 to 300 mA
Maximum 16 points
number of (100% load)
simultaneously
ON outputs
*2
Fuse
Circuit
Sinking
configuration
Output indicator
Internal
circuits
*1 If the ambient temperature is maintained below 50ºC, up to 0.9 A/common can be used.
(A)
0.9
0.8
0
*2 The fuse cannot be replaced by the user. Replace the Unit if the fuse breaks due to an short-circuit or overcur-
rent.
Precautions for Safe Use
Do not connect a load to an output terminal or apply a voltage in excess of the maximum switch-
ing capacity.
3-32
CP1W-32ET
CP1W-32ET1
4.5 to 30 VDC 24 VDC +10%/-5%
0.3 A/output 0.3 A/output
0.9 A/common 0.9 A/common
7.2 A/Unit 1.8 A/Unit
0.1 mA max. 0.1 mA max.
1.5 V max. 1.5 V max.
0.1 ms max. 0.1 ms
1 ms max. 1 ms max.
At 24 VDC +10%/ At 24 VDC +10%/
-5%, 5 to 300 mA -5%, 5 to 300 mA
24 points 8 points
(100% load) (100% load)
OUT
L
L
OUT
24 VDC/
4.5 to 30 VDC
COM(–)
50 55 (˚C)
Ambient temperature
Specification
CP1W-20EDT CP1W-16ET
CP1W-20EDT1 CP1W-16ET1
4.5 to 30 VDC
0.3 A/output
0.9 A/common
3.6 A/Unit
0.1 mA max.
1.5 V max.
0.1 ms max.
1 ms max.
At 24 VDC +10%/
-5%, 5 to 300 mA
16 points
(100% load)
1 fuse/common
Sourcing
Output indicator
Internal
circuits
CP1E CPU Unit Hardware User's Manual(W479)
CP1W-8ET
CP1W-8ET1
4.5 to 30 VDC
0.3 A/output
0.9 A/common
1.8 A/Unit
0.1 mA max.
1.5 V max.
0.1 ms max.
1 ms max.
At 24 VDC +10%/
-5%, 5 to 300 mA
8 points
(100% load)
COM(+)
24 VDC/
4.5 to 30 VDC
OUT
L
L
OUT