Omron CP1E-E14SDR-A User Manual page 9

Section
Section 11 High-speed Counters
Section 12 Pulse Outputs
Section 13 PWM Outputs
Section 14 Serial Communications
Section 15 Analog I/O Function
Section 16 Built-in Functions
Section 17 Ethernet Option Board
Section 18 Operating the Program-
ming Device
Appendices
CP1E CPU Unit Instructions Reference Manual (Cat. No. W483)
Section
Section 1 Summary of Instructions
Section 2 Instruction
Section 3 Instruction Execution
Times and Number of Steps
Section 4 Monitoring and Comput-
ing the Cycle Time
Appendices
4
This section describes the high-speed counter inputs, high-speed
counter interrupts, and the frequency measurement function.
This section describes positioning functions such as trapezoidal control,
jogging, and origin searches.
This section describes the variable-duty-factor pulse (PWM) outputs.
This section describes communications with Programmable Terminals
(PTs) without using communications programming, no-protocol commu-
nications with general components, and connections with a Modbus-
RTU Easy Master, Serial PLC Link, and host computer.
This section describes the built-in analog function for NA-type CPU
Units.
This section describes PID temperature control, clock functions, DM
backup functions, security functions.
This section gives an overview of the Ethernet Option Board, describes
its setting methods, I/O memory allocations, troubleshooting, how to
connect the CX-Programmer, and how to install an Ethernet network.
This section describes basic functions of the CX-Programmer, such as
using the CX-Programmer to write ladder programs to control the CP1E
CPU Unit, to transfer the programs to the CP1E CPU Unit, and to debug
the programs.
The appendices provide lists of programming instructions, the Auxiliary
Area, cycle time response performance, PLC performance at power
interruption.
This section provides a summary of instructions used with a CP1E CPU
Unit.
This section describes the functions, operands and sample programs of
the instructions that are supported by a CP1E CPU Unit.
This section provides the execution times for all instructions used with a
CP1E CPU Unit.
This section describes how to monitor and calculate the cycle time of a
CP1E CPU Unit that can be used in the programs.
The appendices provide a list of instructions by Mnemonic and ASCII
code table for the CP1E CPU Unit.
CP1E CPU Unit Hardware User's Manual(W479)
Contents
Contents